PostHugger™ Brackets For 4 x 4 Posts - Heavy Duty Shop Table Pergola - USA Made

Description

- -
For 4x4 Posts - - For 4x4 Posts - - For 4x4 Posts - - For 4x4 Posts - -
Build your own rugged and heavy duty PostHugger™ Pergola, Double Pergola, shop/garage/CNC table, or deck with our USA made 1/8" steel corner brackets!
Also great for fixing/reinforcing the one you already have! These are not flimsy/bendable metal. We make them using 1/8" thick steel - a single corner bracket weighs just over 2 pounds - - strong enough to take what you throw at it, but not so heavy where they are hard to work with.
These brackets are sold individually and are FOR USE WITH 4 x 4 POSTS (3.5” x 3.5”).  If you want the same thing, but for 6 x 6 posts, click here
https://www.ebay.com/itm/303622263446
NOTE: All our brackets are based on the dimensional size of the lumber but we can make them actual 4"x4" or 6"x6" for you, if needed. Just let us know your ship-to-zip code, the number of brackets and actual size(s) you would like, and we can let you know the total cost for custom brackets made to fit your saw-mill-cut posts.
We get a lot of questions about how to build a double pergola (one with six legs) like you may have seen in one of our photos - they use the following:
4 Outside Corners
2 Flat T's
8 Bent L Inside Corners
6 Full Post Bases (or 6 of our Two-Piece Post Bases)
Our brackets can be installed using any 1/2" wood lag screws or 1/2" thru bolts. If you use lag screws, we recommend at least 1/2" x 2" length.  Bolts/lag screws are not included with our brackets; you can pick them up at your local Home Depot/Menard's/Lowe's/Ace Hardware store.
Need a brackets kit set for a Single or Double Pergola build? Visit our posthugger.com website!
Need a brackets kit set for Hexagon Pergola build, visit our eBay listing here:
https://www.ebay.com/itm/303987843593
Our Individual PostHugger Brackets Product Line includes:
Outside Corner Brackets - bent at a 90 degree angle to fit over any 4 x 4 post (3.5" x 3.5"). There are two 1/2" holes on each of the top ears for fastening to cross members and four 1/2" holes on the bottom leg for mounting to the legs. (The holes for the legs are offset so that if you want to thru bolt, you don't have to worry about hitting any of the other installed bolts!)
Flat T brackets - join other parts of your design.
Bent L’s - use where you want an inside corner.
Double Inside Corners - bent at a 90 degree angle to fit over any 4 x 4 post (3.5" x 3.5"). The bottom part attaches to the inside corner of an upright post, which then allows each ear on the top part of the bracket to go under horizontal posts coming in from the left and right sides.
Flat L’s - Flat like the T, but without the third leg.
Double Inside Corner - This is used on an inside corner to support two incoming posts. The holes are offset so that if used on the same post as an Outside Corner, they will not collide.
Full Post Bases - mount a 4x4 to a flat surface. These have 8 bolt holes to lag with up to 3” lag bolts — two on each side. All 8 are offset, so no concerns about them hitting each other. One side is left open to reduce issues with fat/twisted 4x4’s not fitting. When using our post base, tighten to the inside corner to seat post and the tighten the two sides with the open edges and they will clamp down on the post. The ears for bolting down to concrete are set far enough away so drill/tools have easier access. Like all our brackets, these are made with 1/8” thick steel. This is listed as the "One Full Post Base" option when you checkout.
Two Piece Post Base - Same concept as the Full Post Base, but it is made up of two separate halves and has double the feet. We are able to make this more efficiently, so offer them as a pair for less than the cost of the one-piece Full Post Base. If your post is going up against a wall, you will still want the Full Post Base because it has just two feet, not four, so can be mounted closer to a wall.
Half a Post Base - This item is just one half of the Two Piece Post Base, for those who only need one (or another odd number).
Legless T
™
- This bracket is the same dimensions & placement of bolt holes as the “T” - just without the bottom “leg” of the “T”!  It measures 5.5" x 16.5" for a 6x6 post, and 3.5" x 10.25" for a 4x4 Post.
Flat X
™
- 90 degree cross angle brackets to provide extra, heavy duty support to new or existing DIY builds & structures.
Please note that unless you choose the powder coated option, these ship as raw, unpainted steel. You can either paint them the color of your choice, finish them with a clear coat, or allow to achieve a natural rust patina over time.
***Powder Coated Brackets: If ordering brackets in the black powder coat, please allow an additional 1-2 days for shipping & delivery.***
If you would like to see customer photos (and a video!) of some of our brackets in use, copy & paste the following link into your browser: https://posthugger.com/photos/
WHY BUY POSTHUGGER
™
?
•
We are the original designer of these brackets, often copied by others but never equaled!
•
We use 1/8″ steel which is thicker than a Quarter and a Dime stacked on top of each other.
•
Unlike others who just cut and ship steel right off their table, we take the time to hand debur and wire brush both the inside and outside of every piece.
•
All powder coating is done in-house to ensure a quality application on each and every piece.
•
We use only 100% first-rate, high quality powders, which are all made in America.
•
We develop all designs ourselves and, unlike some, never poach the intellectual property of others.
•
We proudly stand behind all our products.
•
All our PostHugger
™
Brackets & metal artwork products are Made in America with American-Made Steel!
(c) 2023 Thermo-Flex Technologies, Inc. - All Designs, Photos, and Text are the Intellectual Property of Shop Owner and are not to be copied without express written permission.