Disco Party DJ Lighting 4' Truss Stand Expansion Square Clamp Brackets - Pair

Description

Original and exclusive product created and designed by Blue Planet Electron Corp./Blue Planet Offices, Inc. CEO and manufactured at our facility in China. These just came in from the factory.
Purchase includes 2 extension brackets, one pair.
Expand your truss system by mounting as many of 6 lights and other fixtures at one location on the 4 foot square truss. Have lights offset to point where you want. Greatly increase the lighting intensity and excitement of a 4 foot 1x1" square truss on a stand. These trusses only have 4 mounting holes, but now you can have a virtually unlimited number of lights and other fixtures.
Includes 3 sets of M8 black nylon bolts, washers and butterfly (thumbnail) screws per bracket.
Enough room to mount two 8-inch par can lights as shown or multiple pin spots.
11.25 inches long overall. Outside mounting holes are 9.75 inches apart. Each bracket has a weight of 11.6 oz. Made of cold rolled steel 2 mm in thickness. These are tough thick steel. Painted flat black.
The mounting holes are 3/8" and are big enough for the large bolts that comes with the 4 foot trusses.
We recommend no more than 10 lbs. per side with the same amount of weight on each end. The real limit is the truss stand you are using. One photo shows the bracket holding two 10-lb sandbags, the maximum safe amount of weight per side. Note that even with 10 lbs on each side, they do not bend.
Round brackets for large dual-pipe truss systems are also available. Flat stainless steel brackets with and without mounting clamps for aluminum professional truss systems also available.
A bracket with mounting pads with dual mirror balls plus 2 additional brackets for lights also available. Available in a set of 5 pieces with dual mirror ball mounts.